Chemicals

Marine & Industrial Chemicals

Clear, consistent tiles for fast selection and ordering. Each product includes: Description, Uses, Advantages, Key Properties, Packaging.

Barite (API 13A Drilling Grade)

High‑quality drilling‑grade barium sulfate to increase drilling fluid density in all mud systems with API barite specification alignment.

Uses :

Mud weight build for well control

Kill fluid and barite plug preparation

Stable rheology at high density with proper mixing

Advantages :

High specific gravity and chemically inert behavior

Predictable bulk density yields

US/SI dosing tables for stepwise density build

Key Properties :

SG Class	~4.1–4.2 by grade
Moisture	Low — targets for flowability
Bulk Density	~155 lb/ft³ (compacted)

Packaging :

25/50 kg bags, 1 MT big bags

Marine Tank & Hold Cleaners (Alkaline/Neutral)

Biodegradable detergents and degreasers compatible with common marine coatings and metals for tanks, holds, deck, and machinery areas.

Uses :

Cargo residue removal and tank pre‑wash/changeover

Engine room and deck cleaning

General shipcare and maintenance

Advantages :

Defined pH families for material compatibility

Dosing/test guidance to improve outcomes

Category structure that mirrors marine stores

Key Properties :

pH Range	Defined per product family
Dilution	Recommended per application
Compatibility	Coating and substrate guidance

Packaging :

20/25 L cans, 200 L drums

Descalers & Rust Removers

Acidic and neutral descalers formulated for mineral scale and corrosion removal in boilers, heat exchangers, evaporators, and seawater lines.

Uses :

Online/offline descaling and seawater side cleaning

Surface prep before coating/repair

Advantages :

Low‑foaming options with metal‑safe inhibitors

Documented marine procedures for predictable results

Key Properties :

Chemistry Type	Acidic/neutral options
Inhibitor Package	Metal-specific protection
Contact Times	Application dependent

Packaging :

5/25/200 L drums

Boiler & Cooling Water Treatment

Antiscalants, dispersants, oxygen scavengers, and alkalinity/pH controllers with onboard testing and dosing guidance.

Uses :

Protection of boiler feed/boilers

Jacket water and auxiliary cooling circuits

Advantages :

Programmatic monitoring with adjustment windows

Clear control limits and corrective actions

Key Properties :

Treatment Type	Multiple formulations
Target Parameters	System specific
Control Ranges	Test kit referenced

Packaging :

5/25/200 L drums

Fuel Oil & Bunker Additives

Stabilizers, dispersants, combustion improvers, and cleaners to reduce sludge, fouling, and injector problems in MGO/HFO/IFO.

Uses :

Injector and tank cleanliness

Sludge and water separation management

Emissions‑minded treatment during voyages

Advantages :

Marine‑proven dosing and accessory support

Sampling/testing routines compatible with port calls

Key Properties :

Treatment Ratio	Fuel type dependent
Compatibility	MGO/HFO/IFO
Storage	Temperature stable

Packaging :

25/200 L drums

Ballast Water Agents & Neutralizers

Disinfection and neutralization products used within approved ballast treatment systems for compliant discharge workflows.

Uses :

Ballast uptake and discharge cycles

Sampling, dosing, and verification steps onboard

Advantages :

System‑compatible instructions

Marine pack sizes for ship stores

Key Properties :

Active Chemistry	System specific
Dosing Method	Automated/manual
Contact Time	Per system requirements

Packaging :

Liquids/solids in marine packs

Bilge & Engine Degreasers

High‑surfactant, water‑based cleaners for oil and sludge removal in bilges, machinery spaces, and cargo areas.

Uses :

Bilge cleaning and engine room maintenance

Tank space degreasing and surface prep

Advantages :

VOC‑conscious options

Compatibility guidance for common coatings and metals

Key Properties :

Surfactant System	High-efficiency
Dilution/Contact	Application dependent
Rinsing Behavior	Low-foam formulations

Packaging :

20/25 L cans, 200 L drums

Paraffin Wax (Fully/Semi‑Refined)

Slab wax for insulation, moisture barriers, corrosion‑resistant coatings, and blending in marine and industrial uses.

Uses :

Cable/pipe insulation and packaging

Waterproofing and blendstock for waxed goods

Advantages :

MP/penetration grade flexibility

Stable handling and export‑friendly packing

Key Properties :

MP Bands	Grade specific
Oil Content	Fully/semi-refined options
Appearance	Color by grade

Packaging :

25 kg slabs/cartons

Petroleum Jelly (Technical/White Petrolatum)

Semi‑solid hydrophobic jelly for sealing, corrosion protection, and lubrication of cables, joints, and O‑rings.

Uses :

Cable/joint sealing and rust‑prevention interfaces

Barrier lubrication across maintenance tasks

Advantages :

Strong moisture barrier

Multiple grades for industrial needs

Key Properties :

Penetration/Viscosity	Range by grade
Color	Grade specific
Base Oil	Characteristics noted

Packaging :

20–50 kg pails; 175 kg drums

Slack Wax (Medium Oil)

Moderate oil content wax for lubricant blending, cable filling, waterproofing, and rubber/tire compounding.

Uses :

Lube/wax blendstock

Cable/pipe filler and waterproofing layers

Advantages :

Cost‑effective base with tunable oil and MP range

Key Properties :

Oil Content	Banded ranges
MP Ranges	Grade specific
Appearance	Per grade

Packaging :

25–50 kg slabs/drums

Oxidized Bitumen

High‑softening‑point waterproof bitumen solid for deck/floor coatings, mastics, and anticorrosion adhesives.

Uses :

Marine decks and ramps

Repair mastics and waterproofing assemblies

Advantages :

Durable, water‑resistant performance

Grade‑based penetration/softening targets

Key Properties :

Penetration Grade	Grade specific
Softening Point	High, grade based
Flow Behavior	Controlled

Packaging :

25 kg bags; drums; blocks

Caustic Soda (Flakes/Liquid)

Strong alkali for tank/bilge/engine cleaning and water program alkalinity control; liquid variants used where applicable for SOx abatement.

Uses :

Heavy‑duty cleaning and pH management

Integration with dosing/test routines

Advantages :

High‑purity grades and established handling practices

Key Properties :

Concentration/Purity	Multiple options
Dissolution	Predictable behavior
Form	Flakes or liquid

Packaging :

25 kg flake bags/1 MT FIBCs; liquids in drums/IBCs as per port rules

Solvent Dyes (Fuel/Lube/Wax/Plastics)

Oil‑soluble dyes and markers for product identification and coloration in fuels, lubricants, waxes, and plastics.

Uses :

Compliance color schemes and logistics marking

Wax/plastic coloration in supply chains

Advantages :

High shade strength and stability

Key Properties :

Shade Families	Multiple options
Solubility	Oil-soluble
Dosage	Application specific

Packaging :

5–25 kg drums/bags

Frequently Asked Questions

❓ What does Marine & Industrial Chemicals cover under Chemicals? +

Our Marine & Industrial Chemicals offering under Chemicals provides tailored strategies, expert implementation, and full lifecycle support designed for your specific business goals.

❓ What does Barite (API 13A Drilling Grade) cover under Chemicals? +

Our Barite (API 13A Drilling Grade) offering under Chemicals provides tailored strategies, expert implementation, and full lifecycle support designed for your specific business goals.

❓ What does Marine Tank & Hold Cleaners (Alkaline/Neutral) cover under Chemicals? +

Our Marine Tank & Hold Cleaners (Alkaline/Neutral) offering under Chemicals provides tailored strategies, expert implementation, and full lifecycle support designed for your specific business goals.

❓ What does Descalers & Rust Removers cover under Chemicals? +

Our Descalers & Rust Removers offering under Chemicals provides tailored strategies, expert implementation, and full lifecycle support designed for your specific business goals.

❓ What does Boiler & Cooling Water Treatment cover under Chemicals? +

Our Boiler & Cooling Water Treatment offering under Chemicals provides tailored strategies, expert implementation, and full lifecycle support designed for your specific business goals.

🔗 Related Resource(s): Contact

Chemicals

Marine & Industrial Chemicals

Barite (API 13A Drilling Grade)

Marine Tank & Hold Cleaners (Alkaline/Neutral)

Descalers & Rust Removers

Boiler & Cooling Water Treatment

Fuel Oil & Bunker Additives

Ballast Water Agents & Neutralizers

Bilge & Engine Degreasers

Paraffin Wax (Fully/Semi‑Refined)

Petroleum Jelly (Technical/White Petrolatum)

Slack Wax (Medium Oil)

Oxidized Bitumen

Caustic Soda (Flakes/Liquid)

Solvent Dyes (Fuel/Lube/Wax/Plastics)

Frequently Asked Questions

Quick Links

Products

Contact